BINDER

Temperature range: 0 °C to 70 °C
Temperature range with light: 5 °C to 60 °C
positionable illumination cassettes, each with 5 fluorescent tubes
APT.line™ preheating chamber technology
Adjustable fan speed
Intuitive touchscreen controller with time-segment and real-time programming
Internal data logger, measured values can be read out in open format via USB
Unit self-test for comprehensive status analysis
Tight-sealing inner door made of safety glass (ESG)
Avoidance of glass corrosion by special TIMELESS coating
stainless steel racks
Access port with silicone plug, 30 mm, left
Class 3.1 independent temperature safety device (DIN 12880) with visual and audible temperature alarm
Computer interface: Ethernet
Door heating

Temperature range: 0 °C to 70 °C
Temperature range with light: 10 °C to 60 °C
Humidity range: 10 % to 80 % RH
positionable illumination cassettes, each with 5 fluorescent tubes
APT.line™ preheating chamber technology
Adjustable fan speed
Humidity regulation with capacitative humidity sensor and vapor humidification
Intuitive touchscreen controller with time-segment and real-time programming
Internal data logger, measured values can be read out in open format via USB
Unit self-test for comprehensive status analysis
Tight-sealing inner door made of safety glass (ESG)
Avoidance of glass corrosion by special TIMELESS coating
Display via color LCD monitor
stainless steel racks
Access port with silicone plug, 30 mm, left
Class 3.1 independent temperature safety device (DIN 12880) with visual and audible temperature alarm
Computer interface: Ethernet
Door heating

The BINDER climate chamber with illumination of the KBW series achieves homogeneous light distribution with its natural illumination. That allows this climate chamber to create constant lighting and temperature conditions.

Benefits

• Lowest energy consumption in its class
• Environmentally friendly refrigerant
• Multi-level safety concept
• 5-year warranty

Important characteristics

• Range of temperature controller: -90 °C to -40 °C
• Lowest energy consumption in its class
• Powerful cascade compressor cooling unit
• Environmentally friendly refrigerants R-290 and R-170
• Efficient thermal insulation with vacuum insulation panels
• Innovative door gasket concept reduces buildup of ice
• Ergonomic door handle
• Rust-proof interior made completely of stainless steel
• Detachable inner doors made of stainless steel
• 3 stainless-steel shelves providing flexible placement
• Water cooling (depending on version)
• Zero-voltage alarm contact for in-house alarm system
• Ethernet interface
• Operating hours counter
• 2 access ports, Ø 28 mm, rear

The patented expansion rack technology from BINDER also optimizes heat transfer. The shelves can be repositioned for flexible placement and the interior of the chamber is easy to clean.

Benefits

• Fast, gentle drying
• Optimum heat transfer through large thermal conducting plates
• Safe work thanks to proven safety concept
• Also option of modular complete system with vacuum pump and pump chamber

Important characteristics

• Temperature range: ambient temperature +9 °C to +220 °C
• Controller with digital display of pressure and temperature
• Program-controlled drying monitoring with automatic ventilation at end of process
• Internal data logger, measured values can be read out in open format via USB
• 1 aluminum expansion rack, can be custom-positioned
• Inert gas connection
• Shatterproof, spring-mounted safety glass panel
• Large viewing window with option of interior lighting
• Computer interface: Ethernet
• 2 relay outputs, 24 V DC (max. 0.4 A)

Optional equipment

• Touchscreen Controller - Graphical display of main process parameter
• Expansion racks - Choice of aluminum or stainless steel racks depending on the application requirements
• Analogue output for temperature and pressure signals - for external monitoring and evaluation of the process parameters, integration into in-house systems is possible
• Universal ventilation - Selection of different ventilation by air or inert gas
• Universal access port DN 40 - for the introduction of external measuring devices
• Multi Management Software APT-COM - Manage, record and document device parameters
• Services - extensive services ensure correct device function

Temperature range: room temperature plus 15 °C to 200 °C
ATEX compliance chamber's interior: Ex II -/3G c IIB T3-T1 Gc X
APT.line™ preheating chamber technology
Controller with time-segment and real-time programming
2 aluminum expansion racks
Inert gas connection
Shatterproof, spring-mounted safety glass panel
Pressurized instrument panel with compressed air connection
Pressure control device for heating activated < 125 mbar
Flame protection gasket
Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm
Computer interface: RS 422

A BINDER safety vacuum drying oven of the VDL series ensures maximum safety when drying organic solvents standard with TÜV/GS. The inner chamber of the VDL safety vacuum drying oven is designed according to ATEX guidelines 2014/34/EU Ex II -/3G c IIB T3-T1 Gc X.

Temperature range: 0 °C to 70 °C
Humidity range: 10 % to 80 % RH
APT.line™ preheating chamber technology
Humidity regulation with capacitive humidity sensor and vapor humidification
Intuitive touchscreen controller with time-segment and real-time programming
Internal data logger, measured values can be read out in open format via USB
Unit self-test for comprehensive status analysis
Tight-sealing inner door made of safety glass (ESG)
Avoidance of glass corrosion by special TIMELESS coating
Inner chamber made of stainless steel
2 stainless steel racks
Access port with silicone plug, 30 mm, left
4 stable castors, two with brakes, from 240 liters
Class 3.1 independent temperature safety device (DIN 12880) with visual and audible temperature alarm
Computer interface: Ethernet
Door heating

The BINDER KBF is the specialist for unconditionally reliable stability testing and precise maintenance of constant climate conditions. From programming to documentation, this constant climate chamber meets all critical requirements.

Temperature range: -40 °C to 180 °C
APT.line™ preheating chamber technology
Programmable condensation protection for test material
Heated viewing window with LED interior lighting
BINDER Multi Management Software APT-COM™ Basic Edition
Troubleshooting system with visual and audible alarms
Intuitive touchscreen controller with time-segment and real-time programming
Internal data logger, measured values can be read out in open format via USB
Access port with silicone plug (Models 56, 115, 240), 50 mm, left
2 access ports with silicone plugs (Model 720), 80 mm, left and right
Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm
4 castors, two with brakes
Computer interface: Ethernet
230 V power socket on the right-side control panel (Models 115, 240, 720)
Adjustable ramp function
Integrated chart recorder
Real-time clock
Door heating
1 stainless steel rack
Inner chamber made of stainless steel
CFC-free refrigerant R-452A
Cooling with compressor cooling unit

The BINDER MK series chamber is suitable for all heat and cold tests between -40 °C and 180 °C. The MK is a clever alternative to complex individual solutions for cyclical temperature tests.

The main advantage of the BINDER KBF LQC series is the patented light photometry for photostability tests. Two 3D spherical sensors control the light dosage of UV-A and visible light. Once the desired light dosage is achieved, the chamber switches off automatically.

Binder 

Model CB-56 | CO₂ incubator with hot air sterilization and heat sterilizable CO₂ sensor

Binder 

Model CB-170 | CO₂ incubator with hot air sterilization and heat sterilizable CO₂ sensor

Binder 

Model CB-260 | CO₂ incubator with hot air sterilization and heat sterilizable CO₂ sensor

Binder 

Model CB-S170 | CO₂ incubator with hot air sterilization

Binder 

Model CB-S 260 | CO₂ incubator with hot air sterilization

Binder 

Model CBF 170 | CO₂ incubators with hot air sterilization and humidity regulation

Binder 

Model CBF 260 | CO₂ incubators with hot air sterilization and humidity regulation

Binder

Model B 28 | Standard-Incubators with mechanical adjustment

Binder | Model BD 23 | Standard-Incubators with natural convection

Binder | Model BD 400 | Standard-Incubators with natural convection

Binder | Model BD 56 | Standard-Incubators with natural convection

Binder | Model BD 115 | Standard-Incubators with natural convection

Binder | Model BD 260 | Standard-Incubators with natural convection

Binder | Model BD 720 | Standard-Incubators with natural convection

Binder | Model BD-S 56 | Standard-Incubators with natural convection

Binder | Model BD-S 115 | Standard-Incubators with natural convection

Binder | Model BD 56 | Standard-Incubators with natural convection

Binder | Model BD 115 | Standard-Incubators with natural convection

Binder | Model BD 260 | Standard-Incubators with natural convection

Binder | Model BD 720 | Standard-Incubators with natural convection

Binder | Model BD 400 | Standard-Incubators with natural convection

Binder KBW 240 Model Growth Chamber with Light

growth chamber with light

Binder KBW 400 Model Growth Chamber with Light

Growth Chamber with Ligh

Binder KBW 720 Model Growth Chamber with Light

Growth Chamber with Ligh

Binder KBWF 240 Model Growth Chamber with Light and Humidity

growth chamber with light and humidity

Binder KBWF 720 Model Growth Chamber with Light and Humidity

growth chamber with light and humidity

Binder

Model KB ECO 240 | Cooling Incubator with Environmentally Friendly Thermoelectric Cooling

Binder

Model KB ECO 720 | Cooling Incubator with Environmentally Friendly Thermoelectric Cooling

Binder 

Model KB ECO 1020 | Cooling Incubator with Environmentally Friendly Thermoelectric Cooling

Binder

Model KB 65 | Cooling Incubator with Powerful Compressor Cooling

Binder

Model KB 53 | Cooling Incubator with Powerful Compressor Cooling

Binder

Model KB 260| Cooling Incubator with Powerful Compressor Cooling

Binder

Model KB 240 | Cooling Incubator with Powerful Compressor Cooling

Binder

Model KB 720 | Cooling Incubator with Powerful Compressor Cooling

Binder

Model KB 400 | Cooling Incubator with Powerful Compressor Cooling

Binder

Model KT 53 | Cooling Incubators with Peltier Technology

Binder

Model KT 115 | Cooling Incubators with Peltier Technology

Binder

Model KT 170 | Cooling Incubators with Peltier Technology

Binder

Model UF V 500 | Ultra Low-Temperature Freezer with Climate-neutral Refrigerants

Binder

Model UF V 700 | Ultra Low-Temperature Freezer with Climate-neutral Refrigerants

Binder

Model VD 23 | Vacuum Drying Chambers for Non-flammable Solvents

Binder

Model VD 23 | Vacuum Drying Chambers for Non-flammable Solvents

Binder

Model VD 115 | Vacuum Drying Chambers for Non-flammable Solvents

Binder

Model VDL 23 | Vacuum Drying Chambers for Flammable Solvents

Binder

Model VDL 56 | Vacuum Drying Chambers for Flammable Solvents

Binder

Model VDL 115 | Vacuum Drying Chambers for Flammable Solvents

Binder

Model MK 56 | Dynamic Climate Chamber for Rapid Temperature Changes

Binder

Model MK 240 | Dynamic Climate Chamber for Rapid Temperature Changes

Binder

Model MK 115 | Dynamic Climate Chamber for Rapid Temperature Changes

Binder

Model MK 400 | Dynamic Climate Chamber for Rapid Temperature Changes

Binder

Model MK 720 | Dynamic Climate Chamber for Rapid Temperature Changes

Binder

Model MK 1020 | Dynamic Climate Chamber for Rapid Temperature Changes

Binder

Model MKF 56 | Dynamic Climate Chamber for Rapid Temperature Changes with Humidity Control

Binder

Model MKF 115 | Dynamic Climate Chamber for Rapid Temperature Changes with Humidity Control

Binder

Model MKF 240 | Dynamic Climate Chamber for Rapid Temperature Changes with Humidity Control

Binder

Model MKF 400 | Dynamic Climate Chamber for Rapid Temperature Changes with Humidity Control

Binder

Model MKF 720 | Dynamic Climate Chamber for Rapid Temperature Changes with Humidity Control

Binder

Model MKF 1020 | Dynamic Climate Chamber for Rapid Temperature Changes with Humidity Control

Binder

Model MKT 115 |  Dynamic Climate Chamber for Rapid Temperature Changes with Extended Low-Temperature Range

Binder

Model MKT 115 |  Dynamic Climate Chamber for Rapid Temperature Changes with Extended Low-Temperature Range

Binder

Model MKT 720 |  Dynamic Climate Chamber for Rapid Temperature Changes with Extended Low-Temperature Range

Binder

Model MKFT 115 | Dynamic Climate Chamber for Rapid Temperature Changes with Humidity Control and Extended Low Temperature Range

Binder

Model MKFT 240 | Dynamic Climate Chamber for Rapid Temperature Changes with Humidity Control and Extended Low Temperature Range

Binder

Model MKFT 720 | Dynamic Climate Chamber for Rapid Temperature Changes with Humidity Control and Extended Low-Temperature Range

Binder | Model E 28 | Drying and Heating Chambers with Mechanical Adjustment

Drying and Heating Chambers with Mechanical Adjustment

Binder | Model ED 56 | Drying and Heating Chambers with Natural Convection

Binder | Model ED-S 56 | Drying and Heating Chambers with Natural Convection

Binder | Model ED-S 115 | Drying and Heating Chambers with Natural Convection

Binder | Model ED 115 | Drying and Heating Chambers with Natural Convection

Binder | Model ED 23 | Drying and Heating Chambers with Natural Convection

Binder | Model ED 400 | Drying and Heating Chambers with Natural Convection

Binder | Model ED 260 | Drying and Heating Chambers with Natural Convection

Binder | Model ED 720 | Drying and Heating Chambers with Natural Convection

Binder | Model FD 23 | Drying and Heating Chambers with Forced Convection

Binder | Model FD 56 | Drying and Heating Chambers with Forced Convection

Binder | Model FD 115 | Drying and Heating Chambers with Forced Convection

Binder | Model FD 260 | Drying and Heating Chambers with Forced Convection

Binder | Model FD 720 | Drying and Heating Chambers with Forced Convection

Binder | Model FD-S 56 | Drying and Heating Chambers with Forced Convection

Binder | Model FD-S 115 | Drying and Heating Chambers with Forced Convection

Binder | Model FED 56 | Drying and Heating Chambers with Forced Convection and Enhanced Timer Functions

Binder | Model FED 115 | Drying and Heating Chambers with Forced Convection and Enhanced Timer Functions

Binder | Model FED 260 | Drying and Heating Chambers with Forced Convection and Enhanced Timer Functions

Binder | Model FED 720 | Drying and Heating Chambers with Forced Convection and Enhanced Timer Functions

Binder | Model FED 400 | Drying and Heating Chambers with Forced Convection and Enhanced Timer Functions

Binder | Model FP 115 | Drying and Heating Chambers with Forced Convection and Program Functions

Binder | Model FP 720 | Drying and Heating Chambers with Forced Convection and Program Functions

Binder | Model M 53 | Drying and Heating Chambers with Forced Convection and Advanced Program Functions

Binder | Model M 115 | Drying and Heating Chambers with Forced Convection and Advanced Program Functions

Binder | Model M 240 | Drying and Heating Chambers with Forced Convection and Advanced Program Functions

Binder | Model M 400 | Drying and Heating Chambers with Forced Convection and Advanced Program Functions

Binder | Model M 720 | Drying and Heating Chambers with Forced Convection and Advanced Program Functions

Binder

Model KMF 115 | Constant Climate Chamber with Expanded Temperature / Humidity Range

Binder

Model KMF 240 | Constant Climate Chamber with Expanded Temperature / Humidity Range

Binder

Model KMF 115 | Constant Climate Chamber with Expanded Temperature / Humidity Range

Temperature range: -40 °C to 180 °C
Humidity range: 10 % to 98 % RH
Integrated water-storage tank, 20 liters (Models 115, 240, 720)
4 zero-voltage relay contacts
1 stainless steel rack
APT.line™ preheating chamber technology
Intuitive touchscreen controller with time-segment and real-time programming
Internal data logger, measured values can be read out in open format via USB
Programmable condensation protection for test material
Heated viewing window with LED interior lighting
Humidity regulation with capacitative humidity sensor and vapor humidification
BINDER Multi Management Software APT-COM™ Basic Edition
Troubleshooting system with visual and audible alarms
Access port with silicone plug (Models 56, 115, 240: 50 mm, left)
2 access ports with silicone plugs (Model 720: 80 mm, left and right)
Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm
4 castors, two with brakes
Computer interface: Ethernet
230 V power socket on the right-side control panel (Models 115, 240, 720)
Adjustable ramp function
Integrated chart recorder
Real-time clock
Door heating
Alarm notification in the event of insufficient water in fresh water tank (Models 115, 240, 720)
Complete safety connection kit for water supply and drainage, up to 1 m height
Inner chamber made of stainless steel
CFC-free refrigerant R-404A
Cooling with compressor cooling unit

A BINDER MKF series environmental simulation chamber is ideally suited for any cold and heat testing based on current temperature and climate testing methods according to DIN and IEC standards. The comprehensive standard equipment for this environmental simulation chamber ensures ease of operation.

Temperature range: -70 °C to 180 °C
4 zero-voltage relay contacts
APT.line™ preheating chamber technology
Programmable condensation protection for test material
Heated viewing window with LED interior lighting
BINDER Multi Management Software APT-COM™ Basic Edition
Troubleshooting system with visual and audible alarms
Intuitive touchscreen controller with time-segment and real-time programming
Internal data logger, measured values can be read out in open format via USB
Access port with silicone plug (Models 115, 240: 50 mm, left)
2 access ports with silicone plugs (Model 720: 80 mm, left and right)
Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm
4 castors, two with brakes
Computer interface: Ethernet
230 V power socket on the right-side control panel
Adjustable ramp function
Integrated chart recorder
Real-time clock
Door heating
1 stainless steel rack
Inner chamber made of stainless steel
CFC-free refrigerants R-452A and R-23
Cooling with cascade compressor cooling unit

Temperature ranges between -70 °C and 180 °C, with the added benefit of natural simulation, are what make the BINDER MKT series so unique. At the same time, this environmental simulation chamber fulfills the very highest precision and performance requirements for cyclical temperature tests.