BINDER environmental chambers are perfectly suited to material testing under dynamic conditions. The standard rapid alternation speeds of around 5 K/min make standard-compliant testing possible.
An environmental simulation chamber of the MK and MKT Series is suitable for complex temperature profiles in the range of -40 °C or -70 °C to 180 °C.
MKF and MKFT Series of dynamic climate chambers not only make material testing in this temperature range possible, but can also regulate humidity in the range of 10 % to 98 % RH.
Binder
Model MK 1020 | Dynamic Climate Chamber for Rapid Temperature Changes
Binder
Model MK 115 | Dynamic Climate Chamber for Rapid Temperature Changes
Binder
Model MK 240 | Dynamic Climate Chamber for Rapid Temperature Changes
Binder
Model MK 400 | Dynamic Climate Chamber for Rapid Temperature Changes
Binder
Model MK 56 | Dynamic Climate Chamber for Rapid Temperature Changes
Binder
Model MK 720 | Dynamic Climate Chamber for Rapid Temperature Changes
Binder
Model MKF 1020 | Dynamic Climate Chamber for Rapid Temperature Changes with Humidity Control
Binder
Model MKF 115 | Dynamic Climate Chamber for Rapid Temperature Changes with Humidity Control
Binder
Model MKF 240 | Dynamic Climate Chamber for Rapid Temperature Changes with Humidity Control
Binder
Model MKF 400 | Dynamic Climate Chamber for Rapid Temperature Changes with Humidity Control
Binder
Model MKF 56 | Dynamic Climate Chamber for Rapid Temperature Changes with Humidity Control
Binder
Model MKF 720 | Dynamic Climate Chamber for Rapid Temperature Changes with Humidity Control
Binder
Model MKFT 115 | Dynamic Climate Chamber for Rapid Temperature Changes with Humidity Control and Extended Low Temperature Range
Binder
Model MKFT 240 | Dynamic Climate Chamber for Rapid Temperature Changes with Humidity Control and Extended Low Temperature Range
Binder
Model MKFT 720 | Dynamic Climate Chamber for Rapid Temperature Changes with Humidity Control and Extended Low-Temperature Range
Binder
Model MKT 115 | Dynamic Climate Chamber for Rapid Temperature Changes with Extended Low-Temperature Range
Binder
Model MKT 115 | Dynamic Climate Chamber for Rapid Temperature Changes with Extended Low-Temperature Range
Binder
Model MKT 720 | Dynamic Climate Chamber for Rapid Temperature Changes with Extended Low-Temperature Range
Temperature range: -40 °C to 180 °C
APT.line™ preheating chamber technology
Programmable condensation protection for test material
Heated viewing window with LED interior lighting
BINDER Multi Management Software APT-COM™ Basic Edition
Troubleshooting system with visual and audible alarms
Intuitive touchscreen controller with time-segment and real-time programming
Internal data logger, measured values can be read out in open format via USB
Access port with silicone plug (Models 56, 115, 240), 50 mm, left
2 access ports with silicone plugs (Model 720), 80 mm, left and right
Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm
4 castors, two with brakes
Computer interface: Ethernet
230 V power socket on the right-side control panel (Models 115, 240, 720)
Adjustable ramp function
Integrated chart recorder
Real-time clock
Door heating
1 stainless steel rack
Inner chamber made of stainless steel
CFC-free refrigerant R-452A
Cooling with compressor cooling unit
The BINDER MK series chamber is suitable for all heat and cold tests between -40 °C and 180 °C. The MK is a clever alternative to complex individual solutions for cyclical temperature tests.
Temperature range: -40 °C to 180 °C
Humidity range: 10 % to 98 % RH
Integrated water-storage tank, 20 liters (Models 115, 240, 720)
4 zero-voltage relay contacts
1 stainless steel rack
APT.line™ preheating chamber technology
Intuitive touchscreen controller with time-segment and real-time programming
Internal data logger, measured values can be read out in open format via USB
Programmable condensation protection for test material
Heated viewing window with LED interior lighting
Humidity regulation with capacitative humidity sensor and vapor humidification
BINDER Multi Management Software APT-COM™ Basic Edition
Troubleshooting system with visual and audible alarms
Access port with silicone plug (Models 56, 115, 240: 50 mm, left)
2 access ports with silicone plugs (Model 720: 80 mm, left and right)
Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm
4 castors, two with brakes
Computer interface: Ethernet
230 V power socket on the right-side control panel (Models 115, 240, 720)
Adjustable ramp function
Integrated chart recorder
Real-time clock
Door heating
Alarm notification in the event of insufficient water in fresh water tank (Models 115, 240, 720)
Complete safety connection kit for water supply and drainage, up to 1 m height
Inner chamber made of stainless steel
CFC-free refrigerant R-404A
Cooling with compressor cooling unit
A BINDER MKF series environmental simulation chamber is ideally suited for any cold and heat testing based on current temperature and climate testing methods according to DIN and IEC standards. The comprehensive standard equipment for this environmental simulation chamber ensures ease of operation.
Temperature range: -70 °C to 180 °C
4 zero-voltage relay contacts
APT.line™ preheating chamber technology
Programmable condensation protection for test material
Heated viewing window with LED interior lighting
BINDER Multi Management Software APT-COM™ Basic Edition
Troubleshooting system with visual and audible alarms
Intuitive touchscreen controller with time-segment and real-time programming
Internal data logger, measured values can be read out in open format via USB
Access port with silicone plug (Models 115, 240: 50 mm, left)
2 access ports with silicone plugs (Model 720: 80 mm, left and right)
Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm
4 castors, two with brakes
Computer interface: Ethernet
230 V power socket on the right-side control panel
Adjustable ramp function
Integrated chart recorder
Real-time clock
Door heating
1 stainless steel rack
Inner chamber made of stainless steel
CFC-free refrigerants R-452A and R-23
Cooling with cascade compressor cooling unit
Temperature ranges between -70 °C and 180 °C, with the added benefit of natural simulation, are what make the BINDER MKT series so unique. At the same time, this environmental simulation chamber fulfills the very highest precision and performance requirements for cyclical temperature tests.
